MYKE PRO GREENHOUSE MYCORRHIZE INSIDE 30L (1)

Myke Pro Greenhouse Mycorrhize is an endomycorrhizal inoculant used for seeding and transplanting herbaceous plants, annuals, perennials and vegetables. The fine granulation of the carrier blends well with the majority of growing media and can also be applied to rock wool cubes.

DIRECTIONS FOR USE:

Seeding and cuttings

Mix 1 bag per 200 L (1.3 lb per 53 US gallons) of tap water at a maximum temperature of 20°C (68°F) to avoid temperature shock.

Start by pre-mixing the product with a small amount of water and gradually mix in more water until the desired dilution rate is attained.

Maintain agitation in the tank to keep the product in suspension when spraying.

Remove filters and use nozzles with a minimum of 2 mm (10 mesh) openings to avoid clogging.

Remove surface debris to ensure the mycorrhizae will penetrate into media or soil. It is preferable to pre-moisten before spraying.

Apply diluted product to root system, or to media and soil surface around active root area, according to the application chart.

Avoid over-watering immediately after product application to prevent any leaching.

Mix with growing media

Mix 1 bag per 200 L (1.3 lb per 53 US gallons) of tap water at a maximum temperature of 20oC (68oF) to avoid temperature shock.

Start by pre-mixing the product with a small amount of water and gradually mix in more water until the desired dilution rate is attained.

Maintain agitation in the tank to keep the product in suspension when spraying.

Remove filters and use nozzles with a minimum of 2 mm (10 mesh) openings to avoid clogging.

Remove surface debris to ensure the mycorrhizae will penetrate into media. It is preferable to pre-moisten before spraying. Media should be at room temperature to avoid temperature shock at application

Apply diluted product to media. Ensure even distribution for optimum homogeneity. This diluted product can treat 3 m3 (4 yd3).

Avoid over-watering immediately after product application to prevent any leaching.

Transplanting into containers

Mix 1 bag per 200 L (1.3 lb per 53 US gallons) of tap water at a maximum temperature of 20oC (68oF) to avoid temperature shock.

Start by pre-mixing the product with a small amount of water and gradually mix in more water until the desired dilution rate is attained.

Maintain agitation in the tank to keep the product in suspension when spraying.

Remove filters and use nozzles with a minimum of 2 mm (10 mesh)  openings to avoid clogging.

Remove surface debris to ensure the mycorrhizae will penetrate into media or soil. It is preferable to pre-moisten before spraying.

Apply diluted product to root system, or to media and soil surface around active root area, according to the application chart.

Avoid over-watering immediately after product application to prevent any leaching.

 Established plants

Mix 1 bag per 200 L (1.1 lb per 53 US gallons) of tap water at a maximum temperature of 20°C (68°F) to avoid temperature shock.

Start by pre-mixing the product with a small amount of water and gradually mix in more water until the desired dilution rate is attained.

Maintain agitation in the tank to keep the product in suspension when spraying.

Remove filters and use nozzles with a minimum of 2 mm (10 mesh)  openings to avoid clogging.

Make a shallow trench or poke holes around each plant at the drip line and near roots to ensure mycorrhizae will reach active roots.

According to application chart below, holes should be 40 cm (16 in) apart for trees, 30 cm (12 in) for shrubs, 20 cm (8 in) for perennials and 10 cm (4 in) for annuals.

Ensure coverage of the entire circumference of the drip line for each plant.

STORAGE AND HANDLING :

Store in a dry cool place, do not freeze or expose to temperatures above 35°C (95°F)

Avoid severe temperature variation

Close the bag tightly after use

Respect the best before date

Pesticide use: MYKE® PRO is compatible with most insecticides, herbicides and fungicides.

Myke Pro Greenhouse MSDS