FloraFlex Foliar Nutrients - Bloom 1lb
FloraFlex® has engineered the highest quality, cleanest, and most pH stable nutrients on the market. We are proud to bring you the next in the FloraFlex® Nutrients line: an easy to use spray formula for the Bloom stage.
Buying and using nutrients should be simple, honest, and cost effective. The nutrients for our favorite plant should include all of the essential elements, come in only a few or no bottles, and provide you with the ability to improvise and control the process. This is why we came up with a simple two part formula for both the Vegetative and Bloom stages. All of the essential elements included in these products have been documented for you to see. And, we made sure we sourced high quality elements at the best pricing available so we could pass those savings on to you. For more info on how the first FloraFlex Nutrient line evolved, read our story.
Veg & Bloom Foliar
Mix 4-5 grams per gallon of water and apply to plants every 5-7 days.
FloraFlex® Foliars promote vigorous plant growth by providing essential elements directly to the plants exterior through the stomata and epidermis.
V1™ & V2™
First Mix V1 in your water source, allow it to completely dissolve. Then add V2.
Depending on your desired EC use 1-2 teaspoons per 5 gallons of water (1-2 grams per gallon)
Add V1 and then V2 to your water source throughout the entire vegetative stage.
At lower dosages V1 and V2 can be used as a base along with other additives.
B1™ & B2™
First Mix B1 in your water source, allow it to completely dissolve. Then add B2.
Depending on your desired EC use 1-3 teaspoons per 5 gallons of water (1-3 grams per gallon)
Add B1 and then B2 to your water source throughout the entire flowering stage.
At lower dosages B1 and B2 can be used as a base along with other additives.
Add Full Tilt™ to your water source after other inputs (B1 and/or B2) are completely dissolved
3-5 teaspoons per 5 gallons of water (3-5 grams per gallon)
Use for the last two weeks of fertilized feedings of flowering stage.
All formulas are meant to have a starting water EC of 0.2 – 0.3, you can get up to, but should not exceed, an EC of 0.7 – 0.8. If you are using RO water with an EC of 0 then bring your EC up to 0.2 – 0.3 by adding hard/tap water, but most people find success by adding a Cal-Mag. Pure water with no dissolved salts has no buffering capacity and therefore the pH is difficult to predict or control. Blending in some municipal water usually adds a little bicarbonate which gives a little buffer capacity to the water making pH control easier.
While the pH of your fertilized water going into the medium is important, many agree that the water inside and/or coming out of your medium/drain water, what the roots are uptaking, is of the utmost importance. The pH of your drain water should be maintained between 5.3 – 6.3 to maximize your plants ability to absorb the necessary nutrients. Our nutrients have been tested in different water sources and mediums, and were found to consistently remain between these optimized levels.
If you are utilizing other additives with no NPK values then you will keep the amounts of suggested rates. But if you are adding other additives with NPK values, you should decrease the amount of FloraFlex Nutrients. Keep in mind we have formulated these blends to not need any additional NPK value.
Some growers flush weekly in Bloom, others do it a few times on designated days (before and/or during traumatic or stressful occurrences such as defoliation), while some only flush when they see the plants starting to show signs of excess salt build up within the medium or stress signs from their plants, such as the edges of the leaves spiking up. If and or when you flush use a lower ratio of fertilized water between 0.7 – 1.0. Ideal water temperatures for your fertilized water are in the range of 60° – 75°.
Both our Vegetative (V1™ & V2™) and Bloom (B1™ & B2™) powders are two part formulas allowing you the ability to use them with Dosatron Dosers or any fertilizer injection system, making it simple to adjust each formula according to your plants needs.
All Micronutrients will be found in parts 1. If you ever experience micro deficiencies scale back like the formula until your plants look healthy again. The first week of Veg and the first of Bloom should do the trick if you have issues.
Plants need an array of elements to reach their full nutritional potential. Three of these elements—carbon, hydrogen and oxygen—are taken in through the air and water. The remaining have to come through the plant’s roots.
Below are the essential elements and what they do for your favorite plant. They’re divided into three categories: macronutrients, secondary nutrients and micronutrients.
All of these Essential Elements are included in the FloraFlex® Nutrients. We designed it as a simple two part formula for both the Vegetative and Bloom cycles to give you the ability to improvise and control the process with the knowledge of essential element benefits.
Nitrogen (N) is the main nutrient for strong vigorous growth, good leaf color, and photosynthesis. In the first half of a plant’s life it takes in 80% of the nitrogen it needs for the entirety of its growth cycle. Plants absorb nitrogen through their roots in a nitrate form, so for our purposes growth rates can be easily manipulated by how much nitrogen we feed our plants. (In our blends Nitrogen is stored in art 1 of both V & B.If you ever feel like you are having a nitrogen deficiency,simply increase V1/B1 or decrease V2/B2 in your formula in order to get to your desired EC or PPM).
Phosphorous (P) is key to photosynthesis, allowing plants to transform energy from sun/lights and other chemicals into food for the plant. It’s also important for plant respiration, their energy storage and transfer, and impacts the structure of a plant through cell division and cell growth. Ultimately, plants that are lacking Phosphorus will display stunted growth and their yields will suffer. In the early stages of growth Phosphorus strengthens your plants through healthy root development. Once in Bloom it helps promote flower sites, increases size, and assists with the ripening of your plants flowers, fruits, or buds. (You will find Phosphorous exclusively in Part 2: V2/B2 of our blends which enables you to easily increase or decrease the amount of Phosphorus in your formula as you see fit.)
Potassium (K) improves the overall health of plants and is responsible for producing higher quality flowers, fruits, or buds. It helps stimulate early growth in your plants, fruit formation, photosynthesis, and the uptake of other nutrients, which increases protein, resists insects and diseases, and aides in the protection of your plants against extreme temperatures. (We provide plenty of the Potassium needed for your plants to thrive in V2, B1, and B2. There is less Potassium in V1).
Secondary Nutrients are no less essential than Macronutrients, and are only called “secondary” because most plants need them in smaller quantities.
Calcium (Ca) is important for overall plant strength and promotes vigorous growth of young roots and shoots. It helps build cell walls, allows for cell elongation and cell division, is involved in nitrogen metabolism, reduces plant respiration, stimulates microbial activity, and aids the translocation of photosynthesis form leaves to flowers, fruits, and buds. (Necessary amounts will be found in V1 and B1).
Magnesium (Mg) is a component of chlorophyll like phosphorous, so is also necessary for photosynthesis. It helps improve the utilization and mobility of phosphorus, is an activator and component of many plant enzymes, and impacts the early uniformity of your plants. (Necessary amounts will be found in V2 and B2).
Sulfur (S) significantly assists with the formation of chlorophyll. It helps maintain a dark green shade and encourages vigorous plant growth. It also helps produce proteins, enzymes, amino acids and vitamins, and assists in disease resistance. (Necessary amounts will be found in V2 and B2).
"Micro" sounds even less important than “secondary,” yet even though your plants require only trace amounts of Micronutrients, they cannot live without them. We have made sure that you have the required amounts of these elements for your plants, while simultaneously ensuring that they stay well under the heavy metal requirements set by certain states.
All Micronutrients will be found in parts 1. If you ever experience micro deficiencies scale back like the Mild Formula to the ratio of 1:.75 until your plants look healthy again. The first week of Veg and the first of Bloom should do the trick if you have issues.
Boron (B) contributes to cell wall strength, helps in cell development and division, is necessary for sugar transport and hormone development, and is essential in key growth parts of plants such as root tips and new leaf buds.
Copper (Cu) helps metabolize nitrogen, the formation of chlorophyll, promotes growth through enzyme activity, increases sugar content, intensifies color, and improves flavor.
Iron (Fe) acts as an oxygen carrier, promotes formation of chlorophyll, and helps with respiration and photosynthesis.
Manganese (Mn) aids in chlorophyll synthesis by activating fat forming enzymes, increases availability of (P) and (CA), and helps in electron transport during photosynthesis.
Molybdenum (Mo) converts nitrates into amino acids within plants and converts inorganic phosphorus into an organic form. Simply put: it helps plants use Nitrogen.
Zinc (Zn) aids in the development of enzymes and hormones, is necessary for chlorophyll production, promotes carbohydrate and starch formation, and helps with the maturation time of plants.
Not Included and Why
Chlorine (CI) is required in very small quantities and there is usually enough in the water supply. Chloride toxicity is a more common problem and this is the reason chloride is usually not included in most feed programs including ours.
Nickel (Ni) has been identified as an essential element in only a few fruit crops and our favorite plant isn’t one of them.
Dimensions: 8.25" x 6.5" x 0.5"